Printing a retail box is not quite the same as printing a flyer. The ink sits on board rather than paper, the design wraps around folds and flaps, and the finished thing has to look right from every side on a shelf. Most problems with printed packaging are not about the printer at all. They come from choices made at the artwork and proofing stage.
Here is a practical guide to the main printing decisions for UK retail packaging, and the mistakes worth avoiding.
Digital or litho
There are two main ways retail cartons are printed, and the right one depends mostly on quantity.
Digital printing works a bit like a very high quality office printer, without any printing plates. Because there is no plate setup, it is ideal for short runs, test batches and seasonal designs. If you need a few hundred boxes, or several versions of the same box with different flavours or scents, digital is often the sensible route.
Litho printing, also called offset, uses metal plates to transfer ink to the board. Setting up takes time and money, but once the press is running the cost per box drops a long way. For runs in the thousands, litho usually works out cheaper and gives very consistent colour from the first box to the last.
There is no fixed cut off point, as it depends on the box size and how many fit on a sheet. Ask your supplier to quote both if your quantity sits in the middle.
Four colour print and spot colours
Most packaging is printed using four process colours: cyan, magenta, yellow and black, usually shortened to CMYK. Mixing tiny dots of these four creates the full range of colours in photos and illustrations.
Some brand colours are hard to hit with CMYK alone. Bright oranges, strong greens and certain blues can come out duller than expected. That is where a spot colour comes in. A spot colour is a single premixed ink matched to a reference such as a Pantone shade, which gives a more exact and consistent result.
Spot colours are mainly a litho option and add cost, so they are worth it when one colour really is the heart of your brand. For many short digital runs, a carefully set up CMYK version is perfectly good.
Board changes the colour
The same artwork can look different on different boards. White coated board gives bright, crisp colour. Uncoated board soaks up a little more ink, so colours look softer. Brown kraft makes everything darker and warmer unless a white ink is printed underneath first.
If colour accuracy matters, ask to see your design printed on the actual board you are using, not just on a screen.
Proofing: what you will usually get
A PDF proof is a digital file showing your artwork laid out on the box template, or dieline. It is good for checking layout, spelling and where things fall on the folds, but it cannot show true colour because every screen displays colour differently.
A printed proof is a physical sample of your design. A digital printed proof is quick and handy for checking layout and general colour. For a large litho job where colour really matters, some suppliers can arrange a press proof on the real board, which costs more but shows exactly what you will get.
The mistakes that cost the most
These are the problems that come up again and again on packaging artwork.
Artwork set up in RGB. Screens use RGB colour, but print uses CMYK. If the file is not converted, bright colours can shift noticeably once printed.
Low resolution images. Photos should be around 300dpi at the size they will print. An image pulled from a website will look soft or pixelated on a box.
No bleed. Artwork should run about three millimetres past the cut line so there are no thin white edges after cutting.
Text too close to folds and cut lines. Keep important text and logos a few millimetres inside the edges of each panel, so nothing gets trimmed or lost in a crease.
The dieline left visible. The cutting template needs to be on its own layer and set not to print, or the lines can end up on the finished box.
Barcodes in the wrong colour or size. Barcodes scan best in black on white. Pale colours, reversed barcodes or shrinking them too far can stop them scanning at the till.
Panels facing the wrong way. On a box, some panels end up upside down on the flat template. It is easy to place artwork the right way up on screen and find it upside down once the box is folded.
Build in time to check
Proofing feels like a delay when you are keen to get stock on the shelf, but it is the cheapest point in the whole process to fix a problem. Read every word, check every panel, and get a fresh pair of eyes on it.
If it helps, the team at Pro Retail Boxes can check your artwork against the dieline and talk you through whether digital or litho makes more sense for your quantity.
Get the print method, colour and proofs right, and your box will look on the shelf exactly as it did in your head.









